LabVIEW Device not open

[TPascente]

Hi,
I am using a BB60C and its working well with the Spike SW. But when using the LabVIEW examples, I keep getting the “Device not open” error when running the vi. I re-loaded the bb_api-64.dll driver from the LabVIEW drivers download (and deleted the -64 text) and restarted by PC and got the vi to work once. After the second time using the vi I get the same error. Any suggestions on how to fix this? Is there a different dll available? Any help is appreciated. Thanks!!

Attachments:

You must be logged in to view attached files.

[Andrew]

Tom,

We will be responding to these questions from our support email, thanks.

[TPascente]

Thanks, email received and issue resolved!

[pooja.sagathiya]

Hi,
I am using a BB60C and its working well with the Spike SW. But when using the LabVIEW examples, I keep getting the “Device not open” error when running the vi. I re-loaded the bb_api-64.dll driver from the LabVIEW drivers download (and deleted the -64 text) and restarted by PC and got the vi to work once.Any help is appreciated. Thanks!!

[Nathan Snyder]

If you are using the LabVIEW bindings, and an error is returned, say because Spike was opened, then most likely LabVIEW will need to be restarted and the device power-cycled. Otherwise resources may not be cleaned up properly within the LabVIEW environment, causing errors when trying to connect to the device again.

[pooja.sagathiya]

again its same error of “Device not open” is keep coming as even I uninstalled spike for while.

Attachments:

You must be logged in to view attached files.

[Author]

Posts