I thought I would give you an update on this. After buying the new PC, the BB60C has been behaving for the most part. I had mentioned how the hardware (BB60C) gets into a mode where Spike will not talk with it. The green LED will be active on the BB60C. I can exit Spike and restart it and it will not talk with the BB60C. The device manager finds the BB60C and reports no problems. To recover, the BB60C must be unplugged or I can stop and restart the driver. You may recall this happens VERY infrequent. It does not seem tied to running from an external hub or extension cables. When I first purchased the BB60C, I put a lot of hours on it and I don’t think the problem showed up more than 10 times. I thought it was tied to on particular port on the Dell PC. I have settled into using the unit and the problem has not came back even with the extension cable and hub. Until yesterday. After several hours of running, it hung the same way.
I ran it today for about 4 hours and it’s back to working flawless.
Strange.